HDPE Fittings, HDPE butt fusion equal tee, HDPE tee, tee HDPE, HDPE tee fittings, HDPE equal tee, equal tee HDPE, HDPE pipe tee,HDPE Spigot Tee
HDPE equal tee refers to the branch diameter of this tee is same with the main pipeline diameter of this tee, which means three ends of tee have same diameters. An HDPE Equal Tee is used to split a HDPE pipe into two outlets at right angles to the end of the original pipe, or to add in an outlet to a HDPE Pipe.
With a size range from 50 mm to 800 mm, SUNPLAST HDPE equal tee come in SDR 11 & SDR17. The Fittings in SDR 11 are rated to PN16 for water and PN10 for gas, while SDR 17 fittings are rated to PN10 for water and PN6 for gas.
SUNPLAST HDPE equal tee fittings are injection molded type, fabricated by 100% PE100 material, can fully conform to ISO4427-3,EN12201-3, AS/NZS 4129, EN1555, EN ISO15494 standard.
SUNPLAST keeps mass stock in demand for regular sizes, and customers’ urgent demand & prompt shipment request can be satisfied.
More brief details as below:
Product |
HDPE Butt Fusion equal tee ,HDPE tee, tee HDPE, HDPE tee fittings, HDPE equal tee, equal tee HDPE, HDPE pipe tee, HDPE Spigot Tee |
Specification |
DN50~DN800mm |
SDR/pressure ratings |
DN50~DN400mm in both SDR11 & SDR17 DN450~DN800mm in SDR17 |
Material |
Virgin PE100 material |
Manufacturing Process |
Injection molded |
Color |
Regular stock in black, blue/yellow available if quantity is big |
Manufacturing Standard |
ISO4427-3,EN12201-3, AS/NZS 4129, EN1555, EN ISO15494 |
Product Specifications
HDPE equal tee (Butt Fusion): available from DN50mm ~DN800mm
Pressure: SDR11-PN16 & SDR17-PN10
Material: 100% virgin PE100 material
Color: black color or blue color.
ΦD1=ΦD2 |
L |
A |
B |
H |
SDR17 |
SDR11 |
50 |
170 |
55 |
55 |
87 |
× |
√ |
63 |
203 |
63 |
63 |
104 |
√ |
√ |
75 |
230 |
70 |
70 |
118 |
√ |
√ |
90 |
263 |
79 |
77 |
134 |
√ |
√ |
110 |
295 |
82 |
82 |
145 |
√ |
√ |
125 |
315 |
87 |
87 |
163 |
√ |
√ |
140 |
345 |
92 |
92 |
178 |
√ |
√ |
160 |
325 |
70 |
70 |
169 |
√ |
√ |
180 |
437 |
105 |
105 |
225 |
√ |
√ |
200 |
380 |
78 |
87 |
200 |
√ |
√ |
225 |
502 |
122 |
123 |
247 |
√ |
√ |
250 |
500 |
114 |
123 |
263 |
√ |
√ |
280 |
490 |
130 |
135 |
255 |
√ |
√ |
315 |
600 |
130 |
140 |
300 |
√ |
√ |
355 |
722 |
163 |
162 |
360 |
√ |
√ |
400 |
720 |
140 |
155 |
377 |
√ |
√ |
450 |
890 |
180 |
180 |
440 |
√ |
√ |
500 |
1037 |
210 |
220 |
500 |
√ |
√ |
560 |
1085 |
186 |
200 |
545 |
√ |
√ |
630 |
1175 |
210 |
230 |
600 |
√ |
√ |
710 |
1140 |
210 |
210 |
570 |
√ |
× |
800 |
1260 |
230 |
230 |
630 |
√ |
× |
(Noted: the technical data is just for reference, some data may change, if you need exact data, then please contact us directly)
Our Product Range
SUNPLAST is a professional manufacturer of HDPE fittings over 20 years in China, and here in SUNPLAST, all customers can find the best solution of fittings for their pipeline systems.
SUNPLAST HDPE butt fusion fittings can be supplied in a diameter ranging from dn50 to dn800mm in both SDR11 & SDR17, with regular types: HDPE end caps, HDPE reducer, HDPE 90 degree elbow, HDPE 45 degree elbow, HDPE 22.5 degree elbow, HDPE equal tee, HDPE reducing tee, HDPE flange adaptor, G.I. backing rings.,etc
Quality Control
Being a quality conscious organization, we maintain total quality system in our production process as well as marketing process. Stringent quality checks are conducted at every stage, beginning from sourcing quality raw material to packaging and till the delivery of the product.
SUNPLAST has many years of experience in extrusion and injection molding and is the market leader and pioneer in the manufacture of HDPE piping systems in China. Our quality control systems include:
■ Test and acceptance of incoming material.
SUNPLAST company generally adopts TOP QUALITY raw materials from worldwide reputed factories in the production of pipes and fittings.Those materials are recognized as the top raw material by the professional in this vocation. The preferable performance of those materials and their stability establish the high quality station of SUNPLAST piping products and fittings on the markets.
■ In-process inspection and test.
Trained and qualified employees are very important. Most of workers in SUNPLAST are the experts with more than10 years' experience in producing HDPE piping and fittings in China. Their specialty greatly help us to find out the main manufacturing defects during our production, so that we can avoid the unqualified products on the markets timely.
Dimensional test and visual test will be made in the whole production process and packing. Any manufacturing defect can be found out, in case it happens.
The preproduction samples by our quality assurance department are tested by the laboratory technicians for:
(1) Surface finish;
(2) Dimensional accuracy of test samples;(3) Date from extrusion and injection molding machines.
The goods will be released for production only if optimal test results are achieved. These tests are carried out at the beginning of each production series to ensure perfect quality for piping systems.
■ Final Inspection And Test.
Finished products are only released to stock when all tests and inspections conform to the prescribed procedures, which include:
(1) Density; (2)
(2) Melt flow rate;
(3) Longitudinal reversion;
(4) Tensile strength;
(5) Elongation at break;
(6) Thermal stability;
(7) Internal hydrostatic pressure test
Packing & Shipment
Operating as one-stop manufacturer & supplier in China, our HDPE fittings have been exporting to more than 40 countries all over the world. We have been building close relationship with our customers both in our domestic market & exporting markets.
SUNPLAST commits to provide the most reliable solution of HDPE pipe fittings to all customers in worldwide, and we look forward to becoming your reliable partner for HDPE pipe fittings.
FAQS
* what’s the main difference between HDPE equal tee & HDPE reducing tee?
A: The main difference is the diameter of branch outlet. HDPE equal tee’s branch outlet has the exact same diameter as main pipeline, while branch outlet of HDPE reducing tee is smaller diameter than main pipeline.
* Can SUNPLAST provide HDPE fittings in PE80 material?
A: Yes, PE80 fittings are also possible to us.
* What’s the warranty can SUNPLAST provide?
A: All our HDPE fittings are made of virgin PE100 material, and are designed for 50 years lifetime. SUNPLAST will provide a warranty time in quality of 10 years for regular use.
* Can HDPE fittings made by PE100 material weld with pipes in PE80?
A: yes, they can be welded together. But, to achieve the best welding results, we recommend to weld PE80 pipes with PE80 fittings.
* How can SUNPLAST satisfy a fast delivery requirements?
A: To satisfy our customers urgent need requirements, SUNPLAST has stocked large quantity of fittings in stock. Most regular sizes are available in our stock.
So, whatever small quantity order for LCL shipment or big quantity order in full container, SUNPLAST can satisfy all your requirements.
* Can SUNPLAST accept OEM service?
A: Yes, it is acceptable to us. We can also provide poly fittings with customer’s trademark embossed.
Contact Us
If you have any requirements on HDPE fittings, or any question on our fittings, please contact us freely. SUNPLAST has well trained staff who are available to address your needs and provide technical support to all sectors when needed.
http://www.hdpepolyfittings.com/